Description

Chalk and mineral paint for interior woodwork and more.

Soft-satin finish
Self-priming and self-sealing
Robust, scuff resistant finish
Matching Chalk Wall Paint available
Available in 159 colours

Add a little je ne sais quoi to your space with this pale toned, greyish green. There is a little yellow in its base that lifts it out of the ordinary. Similar to Breezing - which is a little greyer and cooler.

Chalk and mineral paint for interior woodwork, furniture and more.

Soft-satin sheen
Simple prep
Self-priming - no primer required
Self-sealing - no top coat required
Robust, scuff resistant finish
Water-based, low VOCs and low odour

Suitable for

Recommended for interior wood work, trims, skirting, doors. Also suitable for powder coated radiators, metal, all sorts of furniture including kitchen cupboards and built-in furniture, both wood and laminate.

The Technical Stuff

Safe for use on children's toys - EN71-3 certified
Contains: Chalk, Clay, Titanium Dioxide, Resin, Talcum, Preservative

Coverage

A 500ml tin will cover up to 7m² with a single coat. We recommend two coats for a more durable finish, so you can expect to cover approx. 3.5m².

Coverage

A 500ml tin will provide a coat of up to 7m². For a durable finish, a minimum of 2 coats is required, so your 500ml tin should provide full coverage for 3.5m² on non-porous surfaces
Thinner application may affect durability
Porous surfaces will affect the rate of coverage and require additional coats
Always ensure you have enough paint for your whole project. When more than 1 tin of the same colour is needed, it is good practice to ensure batch numbers are identical or to intermix batches prior to commencing painting

Preparation

Ensure surfaces are in suitable condition for painting and clean, dry, free from wax, grease or penetrating substances and in sound condition. If previously painted, remove loose or flaking paint. Fill any holes/imperfections with a suitable filler
Remove any rust and apply a suitable metal primer - also apply primer to bare ferrous (iron based) metal
Recommended surface preparation in addition to the above – clean with Frenchic Sugar Soap, rinse, dry, hand-sand sufficiently to abrade the surface and/or to smooth any protrusions after filling. Wipe off any dust
You can watch our video on how to prepare surfaces for painting here.
Ensure the surfaces are thoroughly dry prior to painting
To promote a smooth finish, treat porous surfaces like bare MDF, with an application of 2 coats of Frenchic Finishing Coat prior to painting
Take care on opening the tin lid – a Frenchic tin opener is recommended
Stir thoroughly with a wide implement, such as a Paint Paddle, prior to each use

Application, drying and curing (hardening)

Apply with a good quality brush or roller
To allow self-levelling, avoid overworking the paint
Also suitable for spraying - thinning may be required with tap water up to 15%, apply additional coat(s)
Allow a minimum of 4 hours between coats (even if the paint feels touch dry)
Curing time is up to 2-3 weeks in normal conditions. Treat the newly painted surface with care until then

Clean up and storage

Reseal tin after use
Clean up any spills immediately with water
Wash brushes/rollers in warm, soapy water
Do not store where the tin could be subjected to damp, frost, freezing or high temperatures